☰

DISC GRINDER DG-200

Disc Grinder DG-200 produces parallel sided samples quickly and easily with manual mechanical grinding and polishing

Features

  • Light weight grinder reduces polishing pressure resulting in minimal specimen damage
  • Sample holder stub to hold 3mm diameter sample having maximum thickness of 200 micron down to thickness of 50 micron (+10 micron)
  • Large micrometer dial with least count of 10 micron displays thickness in micron to enable setting desired thickness of the specimen to be ground
  • Precise thickness control can be achieved using ultra fine thread
  • Large diameter polishing face and precisely fitting specimen stub maintains specimen face parallel to polishing surface at all times
Click To Enlarge on Image

Accessories

Specimen Hot Plate

 

  • It is most important that specimen is firmly attached during dimpling. This is best done by using a low melting point wax to form a strong, thin, hard adhesive bond
  • The Specimen Mounting Hot Plate is thermostatically controlled at the precise mounting temperature of 135°C
  • The set point of the hot plate can be programmed from room temperature to 150°C
Click To Enlarge on Image

Download Brochure

    Mascotek Scientific Private Limited

    Is Involved in indigenous design, development and manufacturing of Electron Microscopy related specimen preparation
    equipment for subsequent analysis

    Vision

    Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analysis.

    Mission

    Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analysis.

    Quaity Assurance

    Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) analysis.

    How can we help you?

    Technical Support
    Careers
    E-Mail
    Find Us on Map